Pentax Optio E30 - Manual (Page 79)

77
4
T
aking
Pictu
res
R A C Y q < I i \ E P D >
You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The Sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Setting the Sensitivity
Auto Sensitivity is automatically adjusted to between 80 and 320.
80 • The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
• Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by
noise.
160
320
400
Sensitivity is set at 80 when Shooting mode is set to y. Other values
cannot be set.
Saving the Sensitivity 1p.83
Rec. Mode
MENU Exit Exit Exit
1/3
7
M Recorded Pixels
Quality Level
White Balance
Focusing Area
Sensitivity
AWB
ISO
AUTO
MENU
1, 6
5
2, 3, 4
MENU
1/3
7
M
AWB
ISO
AUTO
Recorded Pixels
Quality Level
White Balance
Focusing Area
Sensitivity
OK OK OK
Rec. Mode
Cancel
Auto
320
160
80
400
OK