Pioneer PRO-610HD - Manual (Page 77)

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5
269
0 SPLIT/SEARCH screen buttons
SPLIT: Press to turn the SPLIT screen function on
and off.
SEARCH: Press to select the SEARCH screen mode.
SELECT: Selects the screen for switching the channel
or input source.* 2
FREEZE: When this button is pressed with the regular
screen, the screen will change to the SPLIT
screen and the picture at the time the button
was pressed will become the sub-picture,
displayed as a frozen image.
SUB CH +, –: Used to switch the channel for the sub-
picture of the SPLIT screen.
- DISPLAY button
Press to display the input source, channel, setting and other
screen indicators for a few seconds.
= CH ENTER button
Fix the selected channel with the direct channel selection
buttons.
~ CH RETURN (channel return) button
Press to switch between the current channel and the
channel you were watching immediately before.
! VOL (volume) +, – buttons
Press plus (+) button to increase the volume, press minus
(–) button to decrease it.
Volume level will appear on the screen as numbers and a
bar graph. The maximum volume level is “63”.
The display will disappear from the screen after 2 seconds.
@ MENU button
Press to turn on the menu screen for use in function
selection.
Press again to return to normal TV screen.
*1 For viewing DTV broadcasts, the SH-D09 digital tuner (sold
separately) is necessary.
*2 With the 9-SEARCH screen, the search picture’s input
source and channel cannot be switched.