Pioneer PRO-610HD - Manual (Page 22)

214
PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5
Adjustments are required for A, C, D, T, L, and V in the table above. Data in other parts are fixed. (I="0")
Proceed with the adjustments in the following order:
• First, perform "(1) STD OFFSET", then perform adjustments (2), (3) and (4) so that the same picture
quality (color temperature) as achieved in (1) is obtained.
• In adjustment (5), make the whole picture more reddish than in (1), and in adjustment (6), make it more reddish.
• When readjusting, once "(1) STD OFFSET" is adjusted, the data for other input signals (component, etc.) revert to the factory-preset
values, in principle.
• After the adjustment of STD OFFSET is completed, check other picture quality modes by switching color temperatures and signals.
It is OK if picture quality does not deviate greatly when input signal is changed (composite, component 15K, etc.).
Furthermore, it is OK if color temperature changes when color remperarure is changed.
With this model, five color temperature switching modes are provided. In FILM and B&W modes, a white part appears to be reddish in
general because of their color temperature settings.
Adjustment Direct key Picture quality data on the screen
(1) STD OFFSET DOWN A Adjustment of all standard picture qualities
(2) COMPONENT 15K SUB CH- A+C Adjustment of C
(3) COMPONENT 31, 33K SUB CH+ A+D Adjustment of D
(4) RGB CH ENTER A+T Adjustment of T
(5) FILM for STD INFO A+L Adjustment of L
(6) B&W for STD DTV MENU A+V Adjustment of V
Adjustment Procedure of White Balnce
OFFSET Data Table
COLOR
TEMP
Setting
User
Mode
Input
Signal
Without RGB Input RGB Input
STD NEWS LIVE FILM STD FILM MOVIE B&W STD B&W MOVIE NEWS LIVE FILM B&W
I J K L M V X
β γ
Y Z
MOVIE GAME
E
TV
B
COMPORNENT 15K
C
COMPORNENT 31K 33K
D
RGB
T
STD OFFSET
A
F
Make adjustment only for items
described as ADJ in the following
table.
Do NOT change other data.
Other data are adjusted in factory
shipment by Fix data of the following
table . (refer to page 215.)
7 Color/Tint Adjustment -3
Start 1st FAC
2
EDIT/ LEARN
DTV
SOURCE
INFO
RECEIVER
4
¢
MENU
INPUT
AUDIO
GUIDE
8
POWER POWER
POWER
VCR REC
VOL VOL
PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT Î
TV/ DTV CBL /SAT DVD /LD VCR
1
4
7
5
8
6
9
2 3
0
ANT
DISPLAY
POWER
MUTING
MENU
MODE SUB CH SPLIT SELECT SEARCH
1 2 3 4 INPUT
FAVORITE CH
TV
TV
DTV ON/OFF
CH ENTER
RETURN CH
FREEZE
1 7 3 ¡
VOL CH
SET/ ENTER ∞
5
2 3
DTV/SAT
DTV/DVD TOP
SCREEN
DTV/(SAT)
TV/SAT/DVD
"Color Bar"
ADJUSTMENT OFFSET
TINT
Do not adjust the RGB, COLOR TEMP FILM and B&W.
1
Adjust 1 COLOR and 2 TINT so that
the color-bar is set in the proper color
saturation and the tint.