Pioneer PRO-610HD - Manual (Page 67)

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5
259
9
After setting, press MENU to turn the
menu off.
HOW TO REMOVE BLOCKING
FROM A PROGRAM IN PROGRESS
When a selected program or a program on a channel to which
you have just changed has a rating higher than the current
program blocking rating, the picture and sound will cut off
and an enter password screen will appear.
Once the password has been entered, blocking will be
removed.
NOTE:
Even when a password has been entered to cancel a block, if the
monitor power is turn OFF then turned ON again, the Program
Blocked screen will appear.
REMOVING BLOCKING IN
MULTI-SCREEN MODE
•
Just as in normal single-screen mode, programs are blocked
in SPLIT screen and SEARCH screen mode (see pages 40
and 41), but blocking may be removed only from the Main
picture.
To remove blocking from a Sub picture or Search picture
screen, switch to the Main picture for that channel and
then remove blocking.
•
When viewing in FREEZE screen (p. 40) mode, only
programming on the Moving screen to the left will be
blocked and the programming on the Still screen to the
right will be displayed as is.
«
Block
Moving screen Still screen
Still screen
•
When blocking is on during SEARCH screen mode, the
screen at search picture side will be blacked out (mute)
without displaying: “PROGRAM BLOCKED”.
If you forget the password
When the message ‘INPUT YOUR PASSWORD’ shown in step
3 is displayed, press the RETURN button on the front panel
and hold it down for 3 seconds or longer.
The password will become “1234”.
CHANGING PASSWORD