Panasonic KX-TG2388 - Manual (Page 66)

Useful Information
66 For assistance, please visit http://www.panasonic.com/consumersupport
General
Problem Cause & Remedy
The unit does not work. L Check the settings (page 8).
L
Check whether the dialing mode setting is correct
(page 15).
L
Fully charge the battery (page 9).
L
Clean the charge contacts and charge again (page 10).
L Check battery installation (page 9).
L
Unplug the base unit’s AC adaptor to reset it. Plug in,
and try again.
L Re-install the battery (page 9) and fully charge it.
“Recharge battery” is
displayed, “7” flashes,
or the handset beeps
intermittently. L Fully charge the battery (page 9).
“Charge for 6h” and
“8” are displayed and
the handset does not
work. L The battery has been discharged. Fully charge the
battery (page 9).
L
Check battery installation (page 9).
You charged the battery
fully, but “Recharge
battery
” is still
displayed and/or “7”
continues to flash, or
“Charge for 6h” and
“8” are displayed.
L Clean the charge contacts and charge again (page 10).
L
The battery may need to be replaced. If you install a
new battery, fully charge it (page 9).
The CHARGE indicator
does not go out after the
battery has been
charged. L This is normal.
If you cannot solve your
problem
L
Visit our website:
http://www.panasonic.com/support
L Contact us via the web at:
http://www.panasonic.com/contactinfo
L
Call our customer call center at:
1-800-211-PANA(7262)