Panasonic KX-TG2388 - Manual (Page 18)

Making/Answering Calls
18 For assistance, please visit http://www.panasonic.com/consumersupport
To put a call on hold
1
Press {HOLD/INTERCOM} during a
conversation.
L “Line on hold.” is displayed.
2
Press {HOLD/INTERCOM} again.
L
“Hold” is displayed.
L
You can search the caller list or
phonebook while a call is on hold. To
exit the list, press {OFF}. The call will
remain on hold.
To return to the call, press {C} or {s}.
Note:
L The base unit user can also take the call
by pressing {SP-PHONE}.
L
If another phone is connected on the
same line (page 8), you can also take
the call by lifting its handset.
L
If a call is kept on hold for 6 minutes, an
alarm tone will start to sound and the
Ringer/Message Alert indicator will start
to flash rapidly. After 4 additional
minutes on hold, the call will be
disconnected.
Using the base unit
1
Press {SP-PHONE}.
L
The SP-PHONE indicator lights.
L “BC” displays.
2
Dial a phone number.
L
The base unit announces each button
you press, including {1} to {0}, {*}
(“Star”), {#} (“Pound”), and {FLASH/
CALL WAIT} (“Flash”).
3
When the other party answers, talk into
the MIC (microphone).
4
To hang up, press {SP-PHONE}.
L The indicator light goes out.
Note:
L
To switch to the handset while using the
base unit speakerphone:
– If the handset is off the base unit or
charger, press {C} or {s} on the
handset, then press {SP-PHONE} on
the base unit.
– If the handset is on the base unit , just
lift up the handset.
L
If the Base Unit Talking Keypad is turned
off (page 44), the base unit will not
announce the entered number.
The handset will not make
announcements, when:
L the Name Announcement is turned
off
L
the Answering System is in use
L
the handset has lost communication
with the base unit
L the base unit is announcing
L
the base unit is making an outside
call.
{
REDIAL}
VOLUME
{<}
, {>} MIC
{
HOLD/CONF}
{ SP-PHONE}
and Indicator