Panasonic KX-TG2388 User Manual
Page 62

Useful Information
62
For assistance, please visit http://www.panasonic.com/consumersupport
You cannot make an
intercom/outside call.
L
Your handset is in remote operation mode (page 49).
Exit by pressing {OFF}.
L
The handset you called is too far from the base unit.
L
If the handset or base unit is in use, you may not be able
to make a call. Try again later.
L
If you are entering a phone number, or the handset
enters the caller list, phonebook, redial list or one-touch
dialer while the Talking Keypad or Announcement is
turned on, you will not be able to make a call using the
base unit. To make a call, return to the standby mode.
You cannot redial.
L
If the last number dialed was more than 48 digits long,
the number will not be redialed correctly.
You cannot make long
distance calls.
L
Please make sure you have long distance service.
The handset does not
display the caller’s name
and/or phone number.
L
You need to subscribe to Caller ID.
L
Other telephone equipment may be interfering with your
phone. Disconnect it and try again.
L
Other electrical appliances connected to the same
outlet may be interfering with Caller ID.
L
Telephone line noise may be affecting Caller ID.
L
The caller requested not to send his/her Caller ID
information (page 27).
L
If a call is being transferred to you, the Caller ID
information will not be displayed.
L
If a (separate) Caller ID box is connected between the
unit and the telephone wall jack, disconnect the Caller
ID box or plug the unit directly into the wall jack.
L
If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
The handset and/or base
unit does not announce
the displayed caller’s
name.
L
The handset and/or base unit ringer volumes are turned
off. Set to high, medium, or low (page 39).
L
The Talking Caller ID feature is turned off. Turn it on
(page 41).
The handset and/or base
unit does not announce
the displayed caller’s
name properly.
L
Name pronunciation may vary. Name pronunciation
quality is based on names most commonly used in the
United States.
L
The handset and/or base unit will announce each letter
of abbreviations, such as “Co.” and “Inc.”.
L
Caller ID supports names of up to 15 letters. If the
caller’s name has more than 15 letters, the name will
not be announced correctly.
Problem
Cause & Remedy