Panasonic KX-TG2388 - Manual (Page 65)

Useful Information
For assistance, please visit http://www.panasonic.com/consumersupport 65
Answering System
Problem Cause & Remedy
The Answering System is
on, but incoming
messages are not
recorded. L The recording time is set to “Greeting only”. Select “1
minute”, “2 minutes” or “3 minutes” (page 54).
L Memory is full. Erase unnecessary messages
(page 49)
“ E ” flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded. L Memory is full. Erase unnecessary messages
(page 49).
You cannot operate the
Answering System from
the base unit or the
handset. L If another user is in use, you may not be able to operate
the Answering System. Try again later.
L If another user is listening to messages or the
Answering System is handling a call, you cannot
operate the Answering System. Try again later.
L When the unit is announcing a list item (name or phone
number) or a dialed number, you cannot operate the
Answering System. Try again later.
You cannot operate the
Answering System from a
touch tone phone.
L
Make sure you entered the correct remote code
(page 54).
L
The Answering System may not respond if the tones
are too short to activate the unit. Press each button
firmly.
L
The Answering System is off. Turn it on (page 47).
You cannot erase
messages.
L
While another user is operating the Answering System
or a caller is leaving a message, you cannot erase
messages.
When you play back
messages or turn on the
Answering System, the
handset and base unit
announce the wrong day
and time. L The date and time may be set incorrectly. Set the date
and time again (page 15).