Panasonic KX-TG2388 - Manual (Page 49)

Answering System Features
For assistance, please visit http://www.panasonic.com/consumersupport 49
Note:
L The display shows the message number
during playback.
L
During playback, the unit will announce
the day and time that each message
was recorded. (Voice time/day stamp)
L
At the end of the last message, the unit
announces “End of final message”.
L If a call is received during playback, the
unit rings and playback stops. To answer
the call, press {SP-PHONE}. For
playback, start again from the beginning
after hanging up.
To adjust the speaker volume
9 levels (high to off) are available. Press
VOLUME {>} or VOLUME {<}
repeatedly while using the answering
system.
To slow down the playback speed (Slow
Talk Message Playback)
Press {MESSAGE/SLOW TALK} during
playback.
L
To return to normal speed, press
{
MESSAGE/SLOW TALK} on the base
unit.
L
Each time you press the button during
playback, the speed will change to slow/
normal.
L
Playback speed will return to normal
after you finish listening to messages.
Repeating a message
Press {REPEAT} while listening to the
message.
L
If pressed within the first 5 seconds of a
message, the previous message will be
played.
Skipping a message
Press {SKIP} to play the next message.
Stopping message playback
Press {STOP}.
L
To resume playback, press {MESSAGE/
SLOW TALK}.
L
If you do not press any button for 60
seconds or if you press {STOP} again,
playback mode will be canceled.
Erasing a specific message
Press {ERASE} while listening to the
message you want to erase.
L The unit beeps, then plays back the next
message.
L
To exit playback mode , press [STOP]
twice .
Erasing all messages
1
Press {ERASE} while the base unit is
not being used.
L The unit will announce “To erase all
messages, press ERASE again.”
2
Within 10 seconds, press {ERASE}
again.
L
The unit will announce “No
messages”.
Note:
L
Caller information for the erased
messages will remain in the caller list.
Listening to messages using
the handset (Remote Operation)
{
OFF}
{ MENU}