Polaroid Polaview 305 - Manual (Page 94)

3 Slide the end of the lamp without the thumbscrew into the
slot on the left side of the lamp chamber (see below).
Sliding the lamp into
place
4 Slide the end of the lamp with the thumbscrew into place,
with the glass pinch-off on the lamp pointing up, and tight-
en the thumbscrew. Make sure to tighten the thumbscrew
as snugly as possible. Pull the lamp to make sure that it is
securely seated.
5 Close the lamp-chamber door and tighten the captive screw.
Maintenance 91