Polaroid Polaview 305 User Manual
Page 16
To set this up:
Connect this cable:
From here:
To here:
External
Mini-jack-to-RCA cable
AUDIO OUT 1, 2
Mini-jack
speakers
adapter (C5105) and
ports on
cable included
mini-jack cable (included
projector
with speakers.
with speakers)
Stereo system
RCA stereo cable
AUDIO OUT
Left/right
(comes with
port on
AUDIO IN
stereo)
projector ports
on
amplifier
Microphone
Microphone cable
MIC port on
Amplified
supplied with
projector
microphone
microphone
Turning on
Once you connect the computer and any video or audio
the projector
sources, turn on the power:
1 Plug the power cord into the projector power receptacle.
Plug the other end into a properly-grounded wall outlet or
surge protector.
2 Move the switch power on the rear of the projector to the
“on” position.
3 Press the
lamp on/off key to ignite the lamp. The lamp
lights slowly.
4 To raise or lower the image, tilt the mirror assembly accord-
ingly.
5 Rotate the ring at the base of the projector lens to focus the
image.
Introduction 11