Polaroid Polaview 305 - Manual (Page 92)

Replacing the lamp
For best performance, you should replace the lamp after 700
hours of operation.
Note: Do not touch the lamp with your bare hands. Use
gloves or a soft cloth and handle it using the metal ends
only.
Removing 1 Leave the projector running with the lamp off for at least
the old lamp five minutes before you change the lamp. This allows the
fan to cool the lamp chamber.
2 After the lamp has cooled sufficiently, turn off the projector
and unplug the power cord. (As a safety feature, you cannot
open the lamp chamber until you disconnect the power
cord )
3 Slide the AC lock button in the direction of the arrow. You
cannot move this button until you disconnect the power
cord from the projector.
4 As you slide open the AC lock button, remove the left side
cover by sliding it about 1/4 of an inch to the left. When the
cover releases, pull it straight off.
Sliding the
rear panel off
of the projector
Maintenance 89