Polaroid Polaview 305 - Manual (Page 62)

58 Using the projector
You can move the Draw toolbar to another spot on the pro-
jected image. Click and hold the title bar of the toolbar, drag
it to a new location, and release the button. See
Program-
ming the remote control later in this chapter, for more infor-
mation.
When you finish using the Draw tool, click the close box in
the upper left corner of the Draw toolbar.
If you use Draw features frequently, consider programming
either the PROG 1 or PROG 2 key, so you can open the Draw
tool quickly with the press of a key.
Setting the timer The Polaview Model 305 Projector includes a break timer,
(for intermission) for lunch breaks, intermissions, question-and-answer ses-
sions, or any other timed pause. Your audience can see a
countdown displayed of the number of minutes remaining.
To use the timer, first set the length of the break. Choose
Tools, Break Timer Value, then indicate the length of the
break, in minutes. You can set a break for up to one hour.
After you indicate the length of the break, choose Tools,
Break Timer, On to start the timer. To turn the Break Timer
off, press the Menu key on the remote or control panel.
Projecting The CLEAR key clears the projected image, allowing you to
transparencies project transparencies in the middle of your presentation.
You can clear to either a white or black background. Press
the CLEAR key once quickly to clear to a white background.
Press and hold it for at least two seconds to clear to a black
background. Press CLEAR again once quickly, to return the
projected image.
Note: The panel area on the projector is 6 x 8 in., slightly
smaller than the panel area of most overhead projectors
(typically 8.5 x 11 in.). You must adjust the focus to display
transparencies.