Polaroid Polaview 305 User Manual
Page 39
The composite audio/video cable (part number C497-6) has
a yellow, red, and white RCA plug at each end. To connect
an NTSC, PAL, or SECAM source to your projector, make
the appropriate cable connections, as indicated in the fol-
lowing chart:
Cable
Projector port
VCR connector
Yellow
VIDEO 1 or 2
VIDEO OUT,
TO MONITOR, etc.
White
AUDIO 1 or 2 IN
L AUDIO OUT
(white plug)
Red
AUDIO 1 or 2 IN
R AUDIO OUT
(red plug)
Connecting video
The projector can also project video from an S-video
from S-video sources
source.
1 Connect one end of the S-video cable (part number C466-6)
to the VIDEO OUT connector on the video source. The cable
has identical, round 4-pin connectors on either end.
2 Connect the other end of the cable to the projector
S-VIDEO 1 port.
34 Detailed setup