Panasonic DMC-FZ1PP - Manual (Page 94)

Others
94
ª LCD Monitor/Viewfinder/Lens
Ring
LCD monitor
• In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with soft dry cloth.
• If the digital camera is extremely cold
when you turn the power on, the image on
the LCD monitor is slightly darker than
usual at first. However, as the internal
temperature increases, it goes back to the
normal brightness.
Viewfinder
• Do not direct the Viewfinder or lens to the
sun. Internal components may be seriously
damaged.
Lens ring
• If you push the zoom lever toward W
during recording with the filter or
conversion lens attached to the digital
camera, 4 corners of the image may
become dark (vignetting). For details, refer
to the operating instructions of your
accessories.
• Be sure to keep the lens ring attached to
the digital camera so as to shut out
unnecessary light.
ª SD Slide Show
If setting the SD slide show with the [SD
Viewer for DSC] which is in the supplied
CD-ROM, when playing back, the
message “START SD SLIDE SHOW?”
is displayed. Select [YES] and press the
4/[REVIEW/SET] button to start the SD
slide show. Select [NO] and press the
4/[REVIEW/SET] button to start normal
playback.
ª Folder Composition
When a Memory Card with data
recorded on it is inserted into a PC, the
folders shown below will be displayed.
• In the 100_PANA folder it is possible to
record up to 999 images.
• In the MISC folder it is possible to record
the files that have been set with DPOF
settings.
Extremely high precision technology
is employed to produce the LCD
monitor screen featuring a total of
approximately 114,000 pixels. The
result is more than 99.99% effective
pixels with a mere 0.01% of the
pixels inactive or always lit.
However, this is not a malfunction
and does not affect the recorded
picture.
Extremely high precision technology
is employed to produce the
Viewfinder screen featuring a total of
approximately 114,000 pixels. The
result is more than 99.99% effective
pixels with a mere 0.01% of the
pixels inactive or always lit.
However, this is not a malfunction
and does not affect the recorded
picture.
100_PANA
MISC
EXPORT
DCIM SD Memory
Card