Panasonic DMC-FZ1PP - Manual (Page 27)

Preparation
27
Setting the Date/Time (Clock Set)
If the message [PLEASE SET THE CLOCK]
appears, set the date and time.
You can go to the setup menu by pressing the
[MENU] button while the message is
displayed.
You can set the year from 2002 to 2099. The
24-hour system is used.
1 Press the [MENU] button.
2 Press 1 to make the setup menu
appear.
• In simple mode, skip this step.
3 Press 3/4 to select [CLOCK SET],
and then press 1.
4 Press 3/4/2/1 to set date and time,
and then press 1.
5 Press 3/4 to select [M/D/Y], [D/M/Y]
or [Y/M/D].
6 Press the [MENU] button twice.
• The menu will disappear.
7 Check if the date/time setting is
displayed correctly, after turning the
camera [OFF] and [ON].
• When the fully charged battery is inserted in the
camera for more than one hour, the clock setting
is memorized by the camera for about 24 hours
even after the battery is removed. (The time may
be shorter if the battery is not charged
sufficiently)
When the clock setting is cancelled, please set
the date and time again.
7
1,6
2,3,4,5
SETUP 2/2 REC
RESET
NO.RESET
ENG LANGUAGE
CLOCK SET
CLOCK SET
M/D/Y
SELECT SET EXIT MENU
SELECT SET EXIT MENU
4,5
3
NOV 10 : 00 1 2002 . .