Panasonic DMC-FZ1PP - Manual (Page 80)

Technical use
80
Setting up the Power Save Mode
In this mode, if the camera is not operated for
a certain amount of time, it is automatically
turned off.
1 Press the [MENU] button.
2 Press 1 to open the setup menu.
3 Press 3/4 to select [POWER SAVE].
4 Press 2/1 to choose the setting time.
• [2 MIN.]
• [5 MIN.]
• [10 MIN.]
• [OFF]: the power is not turned off
automatically.
5 Press the [MENU] button.
• The menu will disappear.
• If you want to cancel the power save mode, turn the power switch to [ON] again after
turning it to [OFF], or press the shutter button.
• When using the AC adaptor/connecting to a PC/recording the motion image/playing back
the motion image/during slide show, the power save mode is not available.
• In simple mode [ ], the power save is fixed to [2 MIN.].
1,5
2,3,4
SETUP 1/2
BEEP
SELECT SET EXIT MENU
REC
MONITOR
POWER SAVE
2 MIN. 5 MIN. 10 MIN.
AUTO REVIEW
3,4