Panasonic DMC-FZ1PP - Manual (Page 56)

Recording images (advanced)
56
Here the white set mode of white balance is
explained.
[Preparation]
• Set the mode dial except for [ ]/[ ]/[ ].
(P25)
1 Press the [MENU] button.
2 Press 3/4 to select [W.BALANCE].
3 Press 2/1 to set to white set [ ].
Only when setting the white balance again
4 Press 1.
• The message “FRAME THE CAMERA AT
THE WHITE SURFACE AND PRESS
SHUTTER” is displayed.
5 Aim the camera at a sheet of white
paper
1 or similar object so that it
completely fills the frame to white on
the screen and press the shutter
button all the way.
• White balance is set.
6 Press the [MENU] button.
• The menu will disappear.
• When taking a picture with the flash after setting
the white balance manually, the white balance
may not be properly adjusted. We recommend
setting the white balance to [AUTO] when using
the flash.
1,6 2,3,4
5
WHITE SET
AT THE WHITE SURFACE
AND PRESS SHUTTER
FRAME THE CAMERA
CANCEL
REC1/3 SETUP
QUALITY
SPOT MODE
PICT.SIZE
W.BALANCE
1600
SELECT SET EXIT MENU
MENU
4
2,3
OFF