Panasonic WJ-HD500B - Manual (Page 92)

92
The recorded images on the disk can be played back on
the Multiscreen Monitor.
The procedures described below are for operations playing
back the hard disk.
Refer to the PLAYBACK MODE or THUMBNAIL parameter
in the COMMON SETUP menu for the play back setup.
■ Basic Playback
1. Select the group to be played back by pressing the
GROUP SELECT button.
Note: Ensure to select one of groups for playing back
when the recording was made in internal timer
recording that is recorded images with a group unit.
2. Pressing the PLAY/PAUSE button will play back the
most recent recordings in the forward direction.
The indicator in the button lights, and the selected
images appear on the monitor screen.
(B) and recording number appear on the monitor
screen to indicate that playback is selected.
Note: When the ALARM SEARCH button is on, the Disk
Recorder plays back for alarm and emergency
recordings on the Hard Disk.
3. Pressing the PLAY/PAUSE button during playback will
pause playback.
The indicator in the button blinks and (y) appears on
the monitor to indicate that playback pause is selected.
4. To resume playback, press the PLAY/PAUSE button.
The indicator in the button lights again and (B)
appears on the monitor screen.
5. To stop playback, press the STOP button.
The indicator in the PLAY/PAUSE button goes off, and
the live images previously selected appear.
BPLAY/ PAUSE y
BPLAY/ PAUSE y
• Forward or Backward search
The recorded images can be searched playing back at
variable speeds.
During playback or playback pause, hold down the
Shuttle Ring clockwise or counterclockwise to search
images as shown below.
By rotating the ring angle the search speed can be
controlled in either direction.
q 1/2 times speed
w 1 times speed
e 2 times speed
r 5 (50, 100) times speed
Note: The search speed can be selectable by the set-
ting when the Shuttle Ring is rotated maximally.
Refer to SHUTTLE SPEED in the 1 COMMON
SETUP for further details.
Clockwise: Search Forward
Counterclockwise: Search Backward
• Forward or Backward field advance
The recorded images can be searched one-by-one,
displaying field by field.
During playback pause, rotating the JogDial clockwise
or counterclockwise to advance an image field by field
as shown below.
Clockwise: Forward Field Advance
Counterclockwise: Backward Field Advance
FWD REV
Rotate
PLAYBACK
q
w
w
e
r
q
w
e
r FWD REV
Rotate
STOP