Paradyne 6381-A3 - Manual (Page 63)

3. Using the Web Interface
6381-A2-GB23-10 January 2005 3-35
Access Control
Access control allows certain PCs to access the router after the firewall is enabled.
To enable any of the Access Control features:
Procedure
1. From the Home screen, click on Advanced.
2. Under Advanced, select Access Control. The Access Control screen appears.
All Access Control rules have precedence over rules that were added via the
Port Forwarding page.
3. The Apply button will temporarily save these settings. To make the change
permanent, click on Tools and select System Commands. On the System
Commands page, click on Save All.
Figure 3-31. Access Control
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.
Log Out
Click on Log Out to close the session.