Paradyne 6381-A3 - Manual (Page 59)

3. Using the Web Interface
6381-A2-GB23-10 January 2005 3-31
Multicast
This option enables the IGMP proxy, which allows NAT clients to participate in
IGMP multicast groups. It should only be enabled if NAT is also enabled.
To enable Multicasting:
Procedure
1. From the Home screen, click on Advanced.
2. Under Advanced, select Muliticast.
3. Click in the check box to enable Multicast. Then select one or more available
connections.
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools and select System Commands. On the System
Commands page, click on Save All.
Figure 3-27. Multicast