Panasonic KX-FLB811 - Manual (Page 21)

1. Introduction and Installation
19 For assistance, please visit http://www.panasonic.com/consumersupport
5 Insert the paper input tray into the unit.
Note:
L If the paper is not loaded correctly, re-adjust
the paper guides, or the paper may jam.
L If the paper input tray does not close, the
plate in the paper input tray may be lifted.
Push the paper and check that the paper is
flat in the paper input tray.
Caution for the paper input tray
L Do not drop the input tray.
L Hold the paper input tray with both hands
when removing or installing. The input
tray weights approximately 2 kg (4.4 lb.)
when the recording paper is fully
installed.
1.8.2 Using the manual input tray
You can print not only on plain paper but also on
special media (transparencies / labels /
envelopes).
The manual input tray is used only for printing
with the computer (page 50) and can hold one
page at a time. When printing multiple pages,
add a next page after the first page has been fed
into the unit.
L Please refer to page 91 for information on
recording paper.
1 Pull open the manual input tray ( 1), then
raise the extender (
2) gently until it clicks
into place.
Approx. 2 kg (4.4 lb.)
Load the recording paper after you start
printing with the computer.
1
2
FLB811-PFQX2307ZB-en.book Page 19 Thursday, February 16, 2006 3:57 PM