Paradyne BitStorm 4800 Express - Manual (Page 9)

4821-A2-GN21-10 July 2004 iii
About This Guide
Document Purpose and Intended Audience
This document is written for technicians who install the BitStorm
®
4800 Express
Model 4821-A2 IP DSLAM.
Document Summary
A master glossary of terms and acronyms used in Paradyne documents is
available on the World Wide Web at www.paradyne.com. Select Support
→
Technical Manuals
→
Technical Glossary .
Section Description
Chapter 1, Installation Describes the physical installation of the BitStorm 4800
Express into a rack.
Chapter 2, Cabling Describes how to install all cables for the BitStorm 4800
Express.
Chapter 3, LEDs Explains the meaning and usage of the front panel LEDs.
Chapter 4, Configuration Describes the minimal configuration steps required to
prepare the BitStorm 4800 Express for remote access,
using the command line interface and web interface.
Appendix A, Connectors
and Pin Assignments Provides pinouts for connectors on the BitStorm 4800
Express.
Appendix B, Equipment List Provides part numbers for the BitStorm 4800 Express and
related products.
Appendix C, Technical
Specifications Lists the technical characteristics of the BitStorm 4800
Express.
Index Lists key terms, acronyms, concepts, and sections in
alphabetical order.