Panasonic PT-D7500U - Manual (Page 40)

40
Powering off the projector
Press the POWER OFF “ ” button.
Select “EXECUTE” with or button
and press the ENTER button.
(or press the POWER OFF “
” button
again.)
A message “UNDER SHUTDOWN 20 SECONDS”
appears and the projection of the image stops
when the count turns to zero.
(The power indicator lamp of the main unit turns to
orange. The cooling fan keeps running still after
the projection stopped.)
Wait until the power indicator lamp of
the main unit turns to red (i.e., until the
cooling fan stops).
While the cooling fan is still running, never turn off
the MAIN POWER switch, nor unplug the projector
from the outlet.
Press the “ O ” marked side of the MAIN
POWER switch to remove all power
from the projector.
• Turning on the power supply will not light up the light
source lamp if the lamp is in the process of cooling
down after turning off the power supply. To light up
the lamp, turn on the power supply again when the
lamp has been cooled sufficiently.
• The projector consumes approximately 12 watts of
power even in standby mode after the cooling fan
stops. (Power indicator lamp lit in red)
• If you re-power the projector after shutting off the
main power inadvertently, the projection lamp may
remain unlit. Please turn the power on again after a
while.
Note
AUTO
SETUP
RGB 1
VIDEO
MENU ENTER
LENS
S-VIDEO SHUTTER
RGB 2 AUX
POWER ON OFF
RGB 1 RGB 2 AUX
MENU
STD
LENS
OSD 1
4
7
2
5
8
3
6
9
0 NEXT USER
LIGHT ID ALL
ASPECT
ID SET
Projector Computer
Numetric
BRIGHT CONTRAST
ON SCREEN
SYSTEM SEL
FUNC 1
D.ZOOM
ENTER
PAGE UP
PAGE DOWN
VIDEO SHUT S- VIDEO
FREEZE
SHUTTER
AUTO SETUP
LASER ON/OFF
Projection