Panasonic PT-D7500U - Manual (Page 30)

30
When installing the projector, it is necessary to connect signals to the input module in accordance with the
connecting equipment.
Refer to the following diagram to establish proper signal connection.
• When switching multiple signals of the
same type and connecting to the same
input module (for example, when using
a signal chosen from multiple high-
vision signals), use a signal selector for
this purpose and connect it with the
projector through RS-232C. Those
signals can be used individually
according to the input terminal on the
signal selector.
• Digital signals cannot be connected to
the signal selector.
RGB signal input module
ET-MD95RGB
I/F Input
Input
Input
Output
RS-232C
Output
RGB signal
Component signal
Video signal input
module ET-MD95VM2
Serial digital input
module ET-MD95SD1
Component signal
SD signal
Projector
RS-232C
input terminal
Signal selector
High-vision video deck
Video deck
(TBC built-in)
Business
digital VCR
PC
Serial digital input
module ET-MD95SD2
DVD player /
BS digital HD tuner
HD serial digital input
module ET-MD95SD3
DVI input module
ET-MD75DV
SD signal
SD signal
DVI
signal
PC
Network module
ET-MD75NT
LAN
Connecting signals to the input module
Note
Installation of input module (optional)