Paradyne Hotwire ATM Line Cards 8385 - Manual (Page 56)

3. Configuration
3-34 February 2003 8335-A2-GB20-70
VOICE (Models 8335, 8365, and 8385 only): This profile allocates enough
bandwidth for one voice call (approximately 80 kbps). If more than one voice
call is placed on the connection using this profile, then the cells will be tagged
(CLP bit set). This profile is policed to 188 cells/sec (enough for one phone
call).
Some numeric values on the ATM Traffic Profiles screen represent cells per
second. An ATM cell is 53 bytes (48 bytes of data plus 5 bytes of overhead), or
424 bits. Conversion guidelines are listed in
Table 3-2, Conversion Guidelines .
A voice circuit typically requires 80 kbps , which is 188 cells per second. ATM cells
are 53 bytes in length (a 5-byte header and 48 bytes for payload). After allowing
4 bytes for the AAL2 overhead, you have approximately 44 bytes available for
data. Therefore, the total overhead is 53/44. For a 64 kbps stream, this results in
77.1 kbps (64 x 53/44). The 80
kbps allows extra bandwidth for additional inband
signaling.
The ATM line cards implement Usage Parameter Control (otherwise known as
policing) as described in the ATM Forum’s Traffic Management Specification 4.1
(AF-TM-0121.000). According to this specification, traffic contracts for the two
VBR ATM service categories (rt-VBR and nrt-VBR) include traffic parameters for
Peak Cell Rate (PCR) and Sustainable Cell Rate (SCR). Policing is implemented
using the recommended dual Generic Cell Rate Algorithm (GCRA) functions.
Table 3-2. Conversion Guidelines
For Standard Speeds For Nx128k Speeds
Kilobits per
second . . . Equals cells per
second . . . Kilobits per
second . . . Equals cells per
second . . .
2320 5471 1536 3623
1552 3660 1024 2415
1168 2755 768 1811
784 1849 512 1208
528 1245 384 906
400 943 256 604
272 642 144 340
144 340