Dome e5 specification – Planar C3i/EX User Manual
Page 47

Dome E5 Specification | 37
Dome E5 Specification
In locations where 240V outlets are used, connect the Dome E5 display to only a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category
Characteristic Item
Specification
Screen
Screen size diagonal
541 mm (21.3 in.)
Resolution
2048 x 2560 pixels (portrait)
2560 x 2048 pixels (landscape)
Pixel pitch
0.165 x 0.165 mm
Pixel arrangement
LCR vertical stripe
Active area
422.40 (H) x 337.92 (V) mm
Grayscale supported
256 shades of gray, programmable gamma from
palette of up to 3061shades of gray
Refresh rate
50 Hz
Contrast ratio
600:1 (typical)
Brightness
750 cd/m
2
(typical), 600 cd/m
2
min.(when new)
Pixel rise/fall time
50 ms typical (25 ms Tr/25 ms Tf)
Viewing angle
170° (± 85°) horizontal/vertical
Interface
Digital Video In
DVI Rev. 1.0 single-channel digital connector
Display control - brightness
DDC2B+
Display identification
EDID read using DDC2B+
USB hub
Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Display status
Dual-stack tricolor LEDs on back panel
Input formats
Landscape orientation
2560 x 2048 (8-bit per pixel)
Portrait orientation
2048 x 2560 (8- bit per pixel)
Screen type
AMLCD (active-matrix liquid crystal display)
Physical
Display size (without stand)
387 mm x 470 mm x 103 mm
(15.2 in. x 18.5 in. x 4.1 in.)
Display weight, typical
6.6 kg (14.5 lb) without stand
10.2 kg (22.5 lb) with stand
Mounting options
Desktop stand (standard);
100-mm VESA mounting (optional)
Power
Adapter
Ault MW122KA1223F52 (CAUTION: Use only the
power adapter supplied with the display unit.)