Planar C3i/EX - Manual (Page 12)

2 | Dome Display
Display Components
Review this illustration of the back panel to identify controls and
ports on the display unit.
Legend
1 Reset button. Restores the display configuration to
its default setting.
2 LED status lights. Provides information about the status of
the display.
3 DVI connector. Drives the data to the display.
4 DIN connector. Drives power to the display; 4-pin connector on
the Dome E2 display, 8-pin connector on the Dome C3i,
Dome E3, Dome E3c, and Dome E5 displays.
1 2 4 3
Dome C3i display
3 4 2
Dome EX display
1