Planar C3i/EX - Manual (Page 23)

Installing the Display | 13
Overriding the default display mode
To start CDE or OpenWindow using the default display mode,
skip this section.
You can override the default display mode by editing the
OWconfig file.
Edit the OWconfig file to override the default display mode and
customize your configuration for OpenWindow or CDE. Look
for the OWconfig file in /usr/openwin/server/etc and in the
/etc/openwin/server/etc directory on the workstation. Edit the
one in the /etc/openwin/server/etc directory.
To edit the OWconfig file
1 Find the following lines in the OWconfig file.
#class = "XSCREENCONFIG" name="DOMEdx2pci0Config"
# device="/dev/dx2pci0.0"
# res="1536x2048e Panel"
# monitor="domegray.vda"
# board="dx2pci-2hd.xqa";
#class = "XSCREENCONFIG" name="DOMEdx2pci1Config"
# device="/dev/dx2pci0.1"
# res="1536x2048e Panel"
# monitor="domegray.vda"
# board="dx2pci-2hd.xqa";