Philips FWD876 - Manual (Page 30)

30
English
DVD Menu Operations
Changing the password
You can change the six-digit code used as
Password.
1 In DISC / USB stop mode, press SYSTEM
MENU key on the remote control.
2 Press
1 / ¡ / 5 / 4 on the remote
control to navigate in the menu.
➜ Move to”Preference Page” and press 4.
➜ Move to “Password” and press ¡.
➜ Press OK.
Night mode - turning on/off
Off
Select this when you want to enjoy the surround
sound with its full dynamic range.
On
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audible level. This
feature is only available for movies with Dolby
Digital mode.
The TV screen will display below picture
3 Use the numeric keys (0-9) to enter your
six-digit code.
➜ The password supplied by default is 000000.
➜ If you forget the six-digit code, press
“136900” to set password.
● Go to “Password” and enter your new code.
Then, enter the same code again to confirm.
4 Press SYSTEM MENU again to remove the
menu.
pg047-pg055_FWD876-Eng-98 2007.12.28, 9:42 30