Preparations – Philips FWD876 User Manual

Page 18

English

IMPORTANT!
– Make sure to complete the
preparation procedures before operating
the system.

Step 1: Inserting batteries into

the remote control

Open the battery compartment.

Place two batteries (Type LR03 or AAA) in the
compartment with the correct polarity as
indicated by “+” and “–” symbols.

Close the cover.

Using the remote control to operate the
system

Point the remote control directly
to the remote sensor (IR) on the
front panel.

Select the source you wish to
control by pressing one of the
source selection buttons on the
remote control (for example
DISC, TUNER).

Then select the desired function (for example

, O or

P).

CAUTION!
– Remove batteries if they are
exhausted or will not be used for a long
time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.

Preparations

Step 2: Setting the TV set

IMPORTANT!
– Make sure you have completed all the
necessary connections.

Press DISC key on the front panel (or press
DISC on the remote control).

Turn on the TV set and set to the correct Video-
In channel. You should see the blue Philips DVD
background screen on the TV set.
➜ You may go to channel 1 on your TV set, then
press the channel down button repeatedly until
you see the Video In channel.
➜ Or, you can use the TV remote control to
select different video modes.
➜ Or, set TV to channel 3 or 4 if you are using
an RF modulator.

Selecting the color system that matches
your TV set

This DVD MINI HI-FI System is compatible with
both NTSC and PAL. For the playback of a DVD
disc on this DVD MINI HI-FI System, the color
systems of the DVD, TV set and DVD MINI HI-FI
System should match.

pg047-pg055_FWD876-Eng-98

2007.12.28, 9:42