Functional overview, Basic function – Philips FWD876 User Manual

Page 15

English

Functional Overview

Basic function

IMPORTANT!
Before you operate the system, complete
the preparation procedures.

Switching the system on

● Press STANDBY ON 2 on the system
● Press STANDBY ON,DISC, USB, TUNER

or TAPE/AUX on the remote control.
➜ The system will switch to the selected source.

To switch the system to Eco-power

standby mode

● In power-on mode, press briefly STANDBY

ON B (STANDBY

ON B on the remote).

➜ Eco-power lamp B on the front panel will
light up.
➜ The VFD display will go blank.

Switching the system to Standby mode

● Press and hold STANDBY ON 2 on the

system (or STANDBY ON

2on the remote

control ) in the active mode.
➜ The clock time will be displayed. Or "--:--"
will be displayed if clock time is not set.

Power-saving automatic standby

● As a power-saving feature, the system will

automatically switch to standby mode if you do
not press any buttons within 15 minutes after a
disc or tape has stopped playing.

Controls on the system
Please refer page5 (front panel drawing )

1 STANDBY ON
–

to switch the system on or to Eco-power
Standby / Standby mode.

2 CLOCK
–

to view or to set clock.

3 DISPLAY SCREEN
–

to view the current status of the system.

4 DISPLAY OSD
–

to view the time, title or chapter information.

5 RECORD
–

to start recording on tape deck .

6 SEARCH•TUNING

1 / ¡

for DISC/USB ......... to search backward/forward.
for TUNER ............... to tune to a lower or higher

radio frequency.

for CLOCK ...............to set the minutes.

38 (PLAY/PAUSE)

for DISC/USB ......... to start or interrupt playback.

for TAPE ..................... to start or interrupt playback.
for PLUG&PLAY ... (on the system only) to initiate

plug & play mode.

7 (STOP)

for DISC/USB ......... to stop playback or to clear a

programme.

for Tuner.................. to delete a preset radio

station.

for TAPE ..................... to stop playback.
for DEMO ................ (in Standby mode) to activate/
deactivate demonstration.
for PLUG&PLAY ... (on the system only) to exit

plug&play mode.

9 O

P (PRESET)

for DISC/USB ......... to select previous/next title,

chapter or track during
playback.

for TUNER ............... to select a preset radio

station.

for CLOCK .............. to set the hour.

0 USB DIRECT
–

to insert a USB device.

! SOURCE – to select the following:

DISC

–

to select disc.

USB
–

to select the USB.

TUNER
–

to select waveband: FM and MW.

TAPE-AUX

–

to select tape deck or to select a connected
external source AUX (auxiliary).

@ SURROUND

- to set various surround sound effects.

# DBB

- to set various sound effects.

$ – VOLUME +
–

to increase or decrease the volume.

% MAX SOUND
–

to activate or deactivate MAX sound.

^ OPEN•CLOSE
–

to open or close the disc tray.

& IR SENSOR
–

point the remote control towards this sensor.

* DISC TRAYS
( OPEN.CLOSE
–

to open or close the tape deck door.

) TAPE DECK
¡ OPEN.CLOSE
–

to open or close the microphone door.

™ MIC IN 1 & MIC IN 2
–

to connect microphone jack.

pg047-pg055_FWD876-Eng-98

2007.12.28, 9:42