Philips LC5241 - Manual (Page 14)

COMPONENT VIDEO SIGNAL (YCbCr)
1. To use YCbCr component video input, set ‘SOURCE
CHANGE’ under ‘COLOR’ in the Advanced menu to ‘YCbCr’
(see page 20).
2. Connect the Y (green), Cb (blue) and Cr (red) connectors of a
DVD player or other component video equipment to the
corresponding Data/YCbCr connector % of the projector.
For this, use a YCbCr Component cable
(optional).
3. To use the built-in audio system, connect one end of the
computer audio cable (3) to the Audio in terminal # on the
projector. Connect the other end (4) to the Audio output
terminal on the video source.
Audio in Mouse Data / YCbCr Video in S-Video in
7. Installation
14
Connecting to video equipment
(3)
(4)
# %
(optional)