Philips PT-F100NTE - Manual (Page 50)

Appendix
Technical Information
E
NGLISH - 50
Specifications
Power supply AC 100 - 240 V 50 Hz/60 Hz
Power consumption
330 W
During standby (when fan is stopped): 3 W
Amps 3.9 A - 1.4 A
LCD panel
Panel size (diagonal) 0.7 type (17.78 mm)
Aspect ratio 4 : 3
Display method 3 transparent LCD panels (RGB)
Drive method Active matrix method
Pixels 786 432 (1 024 x 768) x 3 panels
Lens
Manual zoom (2x)/Manual focus
F 1.7 - 2.6, f 21.6 mm - 43.0 mm
Lamp UHM lamp (250 W)
Luminosity 3 200 lm
Operating environment
Temperature
0 °C - 40 °C (32 °F - 104 °F)
When the HIGHLAND (page 38)
is set to ON: 0 °C - 35 °C (32 °F -
95 °F)
Humidity 20% - 80% (no condensation)
Scanning
frequency
*1
(for RGB signal)
*1. See “List of compatible signals” on page 46 for available signals.
Horizontal scanning
frequency
15 kHz - 91 kHz
Vertical scanning
frequency
50 Hz - 85 Hz
Dot clock frequency Less than 110 MHz
COMPONENT (YP B P R ) signals 480i, 480p, 576i, 576p, 720/50p, 720/60p, 1 080/50i, 1 080/60i,
Colour system 7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Projection size 33" - 300" (838.2 mm - 7 620 mm)
Throw distance 1.2 m - 18.1 m (3'11" - 59'4")
Screen aspect ratio 4 : 3
Installation
FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING
(Menu selection method)
Speaker 1 piece 4 cm (1 - 9/16")
Max. useable volume output 3.0 W