12 erasing caller information, 13 storing caller information into the phone book, Erasing caller information – Panasonic KX-FG6550 User Manual
Page 50: Storing caller information into the, Phone book, Ep 3 of, 12 erasing caller information, 13 storing caller information into the phone book, 1 erasing all caller information, 2 erasing specific caller information

3. Telephone
48
3.12 Erasing caller
information
L
Keep the front cover page open for button
locations.
3.12.1 Erasing all caller
information
With the handset
Make sure the handset is not being used.
1
Press {v} or {e} to display “
Caller
list”.
2
Press {ERASE} (soft key).
L
To cancel erasing, press {NO} (soft key).
3
Press {YES} (soft key).
With the base unit
1
Press {MENU} repeatedly to display
“
CALLER SETUP”.
2
Press {SET}.
L
“
CALL LIST ERASE” will be displayed.
3
Press {SET}.
L
To cancel erasing, press {STOP} 3 times.
4
Press {SET}.
5
Press {STOP}.
3.12.2 Erasing specific caller
information
With the handset
Make sure the handset is not being used.
1
Press {v} or {e} to display “
Caller
list”.
2
Press {v} or {e} repeatedly to display the
desired item.
3
Press {ERASE} (soft key).
L
To erase other items, repeat from step 2.
4
Press {OFF}.
With the base unit
1
Press {CALLER ID}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {ERASE}.
L
To erase other items, repeat from step 2.
4
Press {STOP}.
3.13 Storing caller
information into the phone
book
L
Keep the front cover page open for button
locations.
Important:
L
This feature is not available if the caller
information does not include a telephone
number.
3.13.1 Into the handset
Make sure the handset is not being used.
1
Press {v} or {e} to display “
Caller
list”.
2
Press {v} or {e} repeatedly to display the
desired item.
3
Press {SAVE} (soft key).
L
If the number requires editing, press
{
EDIT} (soft key) repeatedly until the
number is shown in the desired format
(page 45).
4
Press {SAVE} (soft key).
Note:
L
If there is no name information for the
caller, “
Enter name” will be displayed.
You can enter a name by performing the
following steps:
1. Enter the name (see page 39 for
instructions.),
2. Press {v}, and
3. Press {SAVE} (soft key).
If a name is not required, press {v}, then
press {SAVE} (soft key).
L
To continue storing other items, repeat
from step 2.
5
Press {OFF} to exit.
3.13.2 Into the base unit
1
Press {CALLER ID}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {MENU}.
4
Press {SET}.
5
Press {SET}.
FG6550-PFQX2225ZA-en.book Page 48 Monday, August 8, 2005 8:16 PM