Planar VS17SXAD - Manual (Page 18)

VS17 Display 9
QUICK LINKS
Contents
FCC Compliance Statement
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
Adjust Orientation/Angle
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Overview
Hot Key Functions
OSD Menu
Function Menus
OSD Lockout
APPENDIXES
Technical Information
Supported Timing
Troubleshooting
Connect the Optional Touch Screen
1 Plug the RS232 cable into the RS232 port on the display.
2 Plug the other end of the cable to the RS232 serial port on your computer.
3 Load the touchscreen driver from the CD enclosed.
IN OPERATION: No touch
The CD shipped with your display
contains several touchscreen drivers.
Be sure the proper touchscreen driver
is installed on your computer.
If you have conflicts or any problems
with the driver, try reinstalling it.
If you continue to have problems,
then you need to determine the
source—the display or the computer.
Try using the display with another
computer, or installing the driver
on another display system.
If the problem still exists, contact
customer support.