Pioneer DVR-330-S - Manual (Page 68)

The Initial Setup menu 11
68
En
Chapter 11
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.
Some settings can only be changed when the recorder is stopped. During playback and recording these settings are
grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
• Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Tip
• Some of the Initial Setup menu screens shown in this section vary slightly depending on the country or region of
purchase.
Setting Options Explanation
Basic Settings
Clock Setting Auto Set the channel that broadcasts a clock signal and the clock will be set
automatically.
Manual • If there is no channel that broadcasts a clock signal in your area, you
can set the time and date manually.
Display Set preferences for time and date display format.
The clock must be set in order to use timer recording.
Input Line System 525 System Use for NTSC or PAL-60 recording from an external input.
625 System • Use for standard PAL or SECAM recording.
See also About the input line system on page 74 for more information on this setting.
Power Save On No antenna input signals are passed through to the outputs when the
recorder is in standby.
Off • When the recorder is in standby, all signals arriving at the antenna
inputs are passed along to the outputs.
Help Setting On • Switches on the automatic Help screens for GUI displays.
Off Switches off the automatic Help screens for GUI displays. (Press HELP
on the remote to manually display the Help screen.)
Setup Navigator Start Select to start the Setup Navigator. See also Switching on and setting
up on page 23 .
Tuner Settings
Auto Channel Setting Next Screen Proceed to the next screen, select select your country, then wait for
automatic tuning to complete. The channel mapping screen should
appear when the recorder is set up. Press
ENTER to exit this screen.
DVR-330_RL.book 68 ページ ２００５年３月１日 火曜日 午後１０時４７分