Pioneer DVR-330-S - Manual (Page 35)

Recording 05
35
En
You can also set the recorder so that it will adjust the
recording quality to try and fit the recording on to the disc
if it would not otherwise fit at the recording quality you set
(see
Optimized Rec on page 72 for more on this).
Important
• A timer recording can’t be set if:
– Auto Start Recording is in progress.
• – There are already 32 timer programs waiting to be
recorded.
• Timer recording will not start if:
– The recorder is already recording.
– A disc is being initialized, finalized or unfinalized.
• Except when finalizing Video mode discs, timer
recording will start when the operation preventing
timer recording has finished.
• Timer recording will start when the operation
preventing timer recording has finished.
• If a recordable DVD that doesn’t support
simultaneous playback and recording (see
Simultaneous recording and playback on page 40) is
playing when a timer recording is due to start,
playback will automatically stop to allow the
recording to start.
• The timer indicator ( ) lights in the front panel
display when the timer is active. If the indicator is
blinking it means that there is no disc loaded, or the
disc loaded is not recordable.
• Approximately two minutes before a timer recording
is set to start, the recorder will go into timer recording
standby. In timer recording standby you cannot use
some functions.
• Timer recordings have higher priority than the Auto
Start Recording function (see Automatic recording
from a satellite tuner on page 42). A timer recording
will interrupt an Auto Start Recording. (Auto Start
Recording will resume after the timer recording has
finished.)
Easy Timer Recording
As the name suggests, Easy Timer Recording makes
setting up a timer recording as simple as possible.
1 Press HOME MENU and select ‘Timer Recording’
then ‘Easy Timer’.
2 Set the TV channel and recording quality.
• Use the CH +/– buttons to set the channel you want
to record.
• Use the REC MODE button to set the recording
quality. Press repeatedly to switch between XP , SP ,
LP , EP , SLP , SEP and AUTO (and MN if manual
recording mode is on).
• The AUTO option automatically sets the best
recording quality for the space available on the disc
loaded at the time of recording.
RETURN
HOME
MENU
ENTER
CH
REV SCAN FWD SCAN
REC MODE
Easy Timer Recording
Pr 7
SAT
1/01 9:30
CHANNEL +/– SP REC MODE
8:00 9:00 10:00 11:00 12:00 13:00 14:00
– ––:––
1/01
2/01
3/01
DVR-330_RL.book 35 ページ ２００５年３月１日 火曜日 午後１０時４７分