Pioneer DVR-330-S - Manual (Page 48)

Playback 06
48
En
3 Use the / buttons to select an option, then
press ENTER.
The title list display is updated according to the new
display preferences.
4 Press to return to the title list.
Using the Disc Navigator with playback-only
discs
1 Press HOME MENU and select ‘Disc Navigator’
from the on-screen display.
Alternatively, for a CD, Video CD, Super VCD or WMA/
MP3 disc, you can press
DISC NAVIGATOR , which takes
you straight to the Disc Navigator screen.
2 Select what you want to play.
Use the / / / to highlight items and ENTER to
select.
Depending on the type of disc you have loaded, the Disc
Navigator looks slightly different.
• When a DVD is loaded, titles are shown on the left,
chapters on the right. Select a title, or a chapter
within a title.
• When a CD or Video CD/Super VCD
1
is loaded, a list
of the tracks is displayed.
• When a WMA/MP3 disc is loaded, a list of folders and
tracks is displayed (as shown below). Select a folder
or a track within a folder.
Playback starts after you press ENTER .
• For discs that contain both CD-Audio tracks and
WMA/MP3 tracks, you can switch the playback area
between
CD and WMA/MP3 . This can only be done
while the disc is stopped.
Scanning discs
You can fast scan discs at various speeds, forwards or
backward. 2
1 During playback, press or to start
reverse or forward scanning.
• The scanning speed is shown on-screen.
2 Press the same button repeatedly to increase the
scanning speed.
• Forward:
SCAN 1
(1.5x Quick View) SCAN 2 SCAN 3
SCAN 4
• Reverse:
Reverse play 3 SCAN 1 SCAN 2 SCAN 3
SCAN 4
• Forward/Reverse:
SCAN 1
SCAN 2
3 To resume normal playback, press PLAY.
Note
1.It’s not possible to use the Disc Navigator when playing a Video CD/Super VCD in PBC mode.
DVD-Video CD Video CD Super VCD WMA/MP3
Disc Navigator
DV Record
Timer Recording
Disc Setup
Initial Setup
Video/Audio Adjust Play Mode
Photo Viewer
CD
WMA/MP3
Folder (01-03)
01.Rock
02.Pop
03.Dance
Track(001-004)
001.Intro
002.Escape
003.Everything You Say
004.What I Do
Disc Navigator
2.• Only analog audio is output when scanning audio CDs.
• No subtitles are displayed when scanning DVDs.
• Analog and digital sound is output when scanning DVDs with Dolby Digital or Linear PCM sound on forward
SCAN 1 . (Linear PCM is output
from the optical digital output, Except during chase playback and simultaneous recording/playback) No sound is output when using other
scan speeds.
• Depending on the disc, normal playback may automatically resume when a new chapter is reached on a DVD disc.
3.Depending on the disc, reverse playback may not be smooth.
REV SCAN PLAY FWD SCAN
DVD
CD Video CD Super VCD WMA/MP3
DVR-330_RL.book 48 ページ ２００５年３月１日 火曜日 午後１０時４７分