Pioneer DVR-330-S - Manual (Page 37)

Recording 05
37
En
• You can also use the / / / buttons to select
digits from the on-screen display.
2 After making the settings, select ‘Enter’ and
press ENTER.
The timer recording screen appears with the timer
program you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use the /
buttons to highlight CH , then use the / buttons to set
the correct channel number.
• If the channel number is set, but incorrectly, set up
the guide channel (see G-Code CH Setting on
page 69).
4 Select ‘Store Program’ to finish.
• Other options in the same menu panel allow you to
name the program, and change the recording
destination and/or recording mode.
G-Code programming with the power off
You can enter a G-Code programming number when the
recorder is in standby.
Important
• You can’t use this feature until you have set up the
guide channels. See G-Code CH Setting on page 69.
• You can’t change the recording mode.
• You can’t program daily or weekly timer recordings.
1 Press ’G-Code’.
The front panel display shows the current recording
mode and prompts you to enter the G-Code programming
number.
2 Use the number buttons to enter the number.
• To clear the last digit entered, press CLEAR .
3 Press ENTER.
The display shows the timer settings:
Date
Start time End time Recording channel
Recording mode.
• If CODE ERROR appears in the display, check that
the number is correct and that the guide channel is
set (see
G-Code CH Setting on page 69), then set the
timer recording again.
• If CAN’T SET appears in the display, it means that
although you entered a valid number, the program
has already finished.
Setting a manual timer recording
The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
1 Press TIMER REC to display the Timer Recording
screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU , select Timer
Recording , then Timer Recording ).
This screen shows all the timer programs currently set.
• Each row is for one timer recording program, with the
date and time information, channel, recording mode,
and recording status.
HDD DVD
CLEAR
ENTER
CLEAR
CH
G -CODE +
HOME
MENU
CLEAR
ENTER
CLEAR
PREV NEXT
TIMER REC
DVD Remain 0h30m(SP)
SAT 26/03 15:00
Tmr Pgms 2/32
Manhattan Open Tennis OK
SAT 26/03 18:00 – 19:00 Pr 3
World Journey OK
SUN 27/03 19:30 – 21:00 Pr 4
New Input
Timer Program View
DVR-330_RL.book 37 ページ ２００５年３月１日 火曜日 午後１０時４７分