Patton electronic ONSITE SERIES 2635 - Manual (Page 72)

Configuring the security interfaces 72
Models 2603, 2621, and 2635 User Manual 7 • Security
Figure 44. Security configuration home page
2. Go to the third section (Security Interfaces) on the Security Interface Configuration webpage. Click on the
hyperlink Add interface...
3. Select ‘ip1’ beside the Name pull-down menu, and select ‘internal’ beside the Interface Type pull-down
menu. Click on Create. (See figure 45 .)
Figure 45. Define ‘ip1’ interface as Internal
4. Again, click on the hyperlink Add interface... to define the WAN interface as “external.”
5. Select ‘ppp-0’ beside the Name pull-down menu, and select ‘external’ beside the Interface Type pull-down
menu. Click on Create. (See figure 46 .)