About this guide, Audience, Structure – Patton electronic ONSITE SERIES 2635 User Manual
Page 13: Audience structure
13
About this guide
This guide describes installing and configuring Patton Electronics OnSite Series High Speed Routers. The
instructions in this guide are based on the following assumptions:
•
The router may connect to a serial DTE device or T1/E1 line
•
There is a LAN connected to the Ethernet port of the router
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
on page 17 provides information about router features and capabilities
•
on page 24 contains an overview describing router operation
•
on page 27 provides initial configuration procedures
•
on page 40 describes configuring the Ethernet LAN interface
•
on page 44 describes configuring the serial WAN interfaces
•
on page 50 describes configuring WAN services
•
on page 68 describes configuring security for the router
•
on page 82 describes DHCP and DNS configuration
•
on page 93 describes configuring IP services
•
on page 96 describes system configuration
•
on page 104 describes SNTP client configuration
•
on page 108 provides a summary of the OnSite’s status webpage and status LEDs
•
on page 112contains information on contacting Patton technical support for assistance
•
on page 115 contains compliance information for the OnSite routers
•
on page 118 contains specifications for the routers
•
on page 122 provides cable recommendations
•
on page 124 describes the router’s ports
•
on page 129 describes how to use the command line interface (CLI)
For best results, read the contents of this guide before you install the router.