Error messages 67, Error messages, Additionalinformation – Pioneer AVX-P7650DVD User Manual
Page 67
Problems duringVideo CD playback
Symptom
Cause
Action (See)
The PBC (playback control)
menu display cannot be called
up.
The Video CD playing does not fea-
ture PBC.
This operation is not possible with Video CDs
not featuring PBC.
Repeat play and track/time
search are not possible.
The Video CD playing features PBC. This operation is not possible with Video CDs
featuring PBC.
Problems duringmulti-channel processor connection
Symptom
Cause
Action (See)
No sounds are heard.
The volume level will not rise.
Optical cables are not connected
correctly.
Connect the cables correctly.
Multi-channel processor is not com-
patible with a 96 kHz signal.
Switch the output setting to 48 kHz. (Page 56)
Error messages
When problems occur with disc playback, an error message appears on the display. Refer to the
table below to identify the problem, then take the suggested corrective action. If the error persists,
contact your dealer or your nearest PIONEER Service Center.
Message
Cause
Action (See)
ERROR-02
Dirty disc
Clean disc.
Scratched disc
Replace disc.
The disc is loaded upside down
Check that the disc is loaded correctly.
ERROR-05
Electrical or mechanical
Press RESET.
DIFFERENT REGION DISC (RE-
GION ERR)
The disc does not have the same re-
gion number as this unit
Replace the DVD video with one bearing the
correct region number.
NON PLAYABLE DISC (NON-
PLAY)
This type of disc cannot be played
by this unit
Replace the disc with one this unit can play.
THERMAL PROTECTION IN
MOTION (TEMP)
The temperature of this unit is out-
side the normal operating range
Wait until the units temperature returns to
within normal operating limits.
PROTECT
All the files on the inserted disc are
secured by digital rights manage-
ment (DRM)
Replace disc.
TRK SKIPPED
The inserted disc contains WMA
files that are protected by digital
rights management (DRM)
Replace disc.
AdditionalInformation
En
67
Appendix
AdditionalInformation