Setting angle icon display, Setting the aspect ratio, Setting the parentallock – Pioneer AVX-P7650DVD User Manual

Page 54: Setting up the dvd player, Setting the code number and level

1 Use the joystick to select ASUB TITL in

LANGUAGE.

2 Move the joystick up to turn assist sub-

titles on.

# To turn assist subtitles off, move the joystick
down.

Setting angle icon display

You can set it up so that the angle icon ap-

pears on scenes where the angle can be

switched.

1 Use the joystick to select M. ANGLE in

VISUAL.

2 Move the joystick up to turn angle icon

display on.

# To turn angle icon display off, move the joy-
stick down.

Setting the aspect ratio

There are two kinds of display. A wide screen

display has a width-to-height ratio (TV aspect)

of 16:9, while a regular display has a TV aspect

of 4:3. Be sure to select the correct TV aspect

for the display connected to REAR VIDEO

OUTPUT.

! When using a regular display, select either

LETTER BOX or PANSCAN. Selecting 16 : 9

may result in an unnatural picture.

! If you select the TV aspect, the units dis-

play changes to the same setting.

1 Use the joystick to select TV ASPECT in

VISUAL.

2 Use the joystick to select the TV aspect.

Move to change the TV aspect; click to select.

! 16 : 9 Wide screen picture (16:9) is dis-

played as it is (initial setting)

! LETTER BOX The picture is the shape of a

letterbox with black bands at the top and
bottom of the screen

! PANSCAN The picture is cut short at the

right and left of the screen

Notes

! When playing discs that do not specify

PANSCAN, playback is with LETTER BOX
even if you select PANSCAN setting. Confirm
whether the disc package bears the

16 : 9 LB

mark. (See page 10.)

! Some discs do not enable changing of the TV

aspect. For details, refer to the discs in-
structions.

Setting the parentallock

Some DVD video discs let you use parental

lock to restrict the viewing of violent and adult-

oriented scenes by children. You can set the

parental lock level in steps as desired.

! When you set a parental lock level and then

play a disc featuring parental lock, code

number input indications may be dis-

played. In this case, playback will begin

when the correct code number is input.

Setting the code number and level

When you first use this function, register your

code number. If you do not register a code

number, parental lock will not operate.

1 Use the joystick to select PARENTAL in

VISUAL.

2 Press 09 to input a four digit code

number.

Setting up the DVD player

Section