Changing the wide screen mode, Adjusting the picture adjustment, Basic operations – Pioneer AVX-P7650DVD User Manual

Page 20

% Press FLIP DOWN to turn the LCD panel

horizontal.

# To return to original position, press
FLIP DOWN again.
# The LCD panel returns to the original position
automatically with beeping sound 10 seconds
after operation.

Changing the wide screen

mode

You can select a desired mode for enlarging a

4:3 picture to a 16:9 one.

% Press WIDE to select the desired set-

ting.

Press WIDE repeatedly to switch between the

following settings:

FULL (full)JUST (just)CINEMA (cinema)

ZOOM (zoom)NORMAL (normal)

FULL (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, giving you a 4:3 TV picture (normal pic-
ture) without any omissions.

JUST (just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizontally
to the ends, enabling you to enjoy a 4:3 picture
without sensing any disparity even on a wide
screen.

CINEMA (cinema)
The picture is enlarged by the same proportion as
FULL or ZOOM in the horizontal direction and by
an intermediate proportion between FULL and
ZOOM in the vertical direction; ideal for a cine-
ma-sized picture (wide screen picture) where cap-
tions lie outside.

ZOOM (zoom)
A 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cine-
ma-sized picture (wide screen picture).

NORMAL (normal)
A 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.

Notes

! Different settings can be memorized for each

video source.

! When video is viewed in a wide screen mode

that does not match its original aspect ratio, it
may appear different.

! Remember that using the wide mode feature

of this system for commercial or public view-
ing purposes may constitute an infringement
on the authors rights protected by the Copy-
right Law.

! Video will appear grainy when viewed in

CINEMA or ZOOM mode.

! The rear view camera picture is always

FULL.

Adjusting the picture

adjustment

You can adjust BRIGHT (brightness),

CONTRAST (contrast), COLOR (color) and

HUE (hue) for each source and rear view cam-

era.

! The adjustments of BRIGHT and

CONTRAST are stored separately for light

ambient (daytime) and dark ambient (night-

time). A sun

or moon

is displayed to

the left of BRIGHT and CONTRAST, respec-

tively, as the ambient light sensor deter-

mines brightness or darkness.

! You cannot adjust HUE for PAL video.

Basic Operations

Section