Pioneer AVX-P7650DVD - Manual (Page 34)

Listening to a CD
1 3 4 2
6 5
These are the basic steps necessary to play a
CD with your DVD player. More advanced CD
operation is explained starting on the next
page.
1 Source icon
Shows which source has been selected.
2 CD indicator
Shows when a CD is playing.
3 Track number indicator
Shows the track currently playing.
4 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
5 Disc title indicator
Shows the title of the currently playing disc.
6 Repeat indicator
Shows when repeat range is selected to cur-
rent track.
1 Press AV SOURCE to select the DVD
player.
Press AV SOURCE until DVD player is selected
as the source.
# If no disc is loaded in the unit, you cannot se-
lect the DVD player. Insert a disc in the unit.
(Refer to page 17.)
2 To perform fast forward or reverse,
press and hold m or n.
# You can also perform fast reverse/fast forward
by holding the joystick left or right.
3 To skip back or forward to another
track, press o or p.
Pressing p skips to the start of the next
track. Pressing o once skips to the start of
the current track. Pressing again will skip to
the previous track.
# You can also skip back or forward to another
track by moving the joystick left or right.
Note
When playing discs with MP3/WMA files and
audio data (CD-DA) such as CD-EXTRA and
MIXED-MODE CDs, both types can be played only
by switching mode between MP3/WMA and CD-
DA by pressing BAND/ESC. This function can be
operated only when the disc is playing.
Stopping playback
% Press g.
# When you stop CD playback by pressing g,
that location on the disc is memorized enabling
playback from that point when you play the disc
again.
# To play back the disc again, press f.
Playing CDs
En
34
Section
07