Planet Technology VIP-280 - Manual (Page 20)

002886222199518.
Another example, if user key in the number is 90, STRIP field is setting
to 2, and the PREFIX field is setting to 0,22199518, the actually call out
number will be 0,22199518 ( “, “ mean wait 1 second).
This example is especially for speed dial function.
Profile
Define the optional special call out parameters on this destination.
Please input the name you Udefined on the profile (Please refer to the
“VoIP Config Routing Setup Routing Profile”) list.
Delete Delete this rule item on routing table.
To add new rule item on routing table, please assign the item number you want to insert before, input
AREA CODE and IP address then press ADD button to add it on the list. Then modify the necessary
information on the routing table list.
Please remember to press the modify button to take it effect. For store back to flash memory, please
press ”Syetem Maintenance Save Modification” .
When user enable the hot line function on “VoIP Config
Line Configure Line Setting” menu, it will over ride the
above parameters and direct call out by hot line call out
rule.
L
Hint
VoIP Call In
This page let you define the routing rule for Call in from VoIP. (VoIP router got a VoIP call required form
network, and then translates the phone number passed from remote side VoIP router to the real dial out
number, and line base on this VoIP call in routing table). Each time when the VoIP router received a
VoIP call from network, it will check with “Area Code” to see which rule matched to service, if no rule
matched, it will refuse to call out and will bound back the call.
When the VoIP router received a VoIP called from network, it will check below rules fields then decide
20