Printek 4000se - Manual (Page 81)

P R I N T E R C O N F I G U R A T I O N
73
Test Menu
The TEST MENU is used to access some testing as well as some record
keeping items. To access the test menu, press the SETUP button until
TEST
MENU is displayed as shown below.
TEST MENU
Next press either of the FUNCTION buttons to access the test modes
available.
Print the Menus Print the
Menus
No
Possible Values: No*, Current Values
This item may be used to print the entire list of current values.
Current Values will print only the items relevant to the current
printer configuration and their current values. This provides a means of
record keeping or “backup”, so that the values can be checked and
restored in case an operator inadvertently changes one.
After setting this value, press ONLINE to begin printing. After printing is
completed, the value of this item will automatically return to
No . Note that
once printing begins, taking the printer off line for any reason (ONLINE
button pressed, ribbon lid or paper door opened, or a paper fault) will
cause printing to be aborted.
Test Mode Test Mode
Off
Possible Values: Off*, Barber Pole,
Hex Dump, Demos