Printek 4000se - Manual (Page 41)

D A I L Y O P E R A T I O N
33
Installing A New Ribbon Cartridge
Removing the Old Ribbon Cartridge
1. Open the ribbon lid on top of the printer and position the print
head for ribbon loading by lifting the ribbon loading handle as
indicated in the following picture.
1. Opening the Ribbon Loading Handle
2. Ribbon Support Brackets
2. Remove the old ribbon by lifting the left hand end of the ribbon
off the left support bracket.
3. Lift out the right end of the ribbon and set the ribbon aside.
Note: If the printer power is on, “Ribbon Removed”
will be displayed as the ribbon is lifted out.
1
2