Printek 4000se - Manual (Page 68)

P R I N T E R C O N F I G U R A T I O N
60
IP Address Method IP Address
Auto
Possible Values: Auto*, Static
This item controls how the optional Ethernet interface card receives its
network address. When set to Auto, the Ethernet card will receive its
network address from a network DHCP server (typical installation). When
set to Static, the user sets the TCP/IP address, Subnet Mask and TCP/IP
Gateway address as follows:
IP Address IP Address
192.160.0.27
Possible Values: 000.000.000.000 … 255.255.255.255
To set the TCP/IP address, use the CURSOR button to select which digit
group you wish to change, and then use the UP/DOWN VALUE button to
change the value. The value will change rapidly if the key is held down.
Subnet Mask Subnet Mask
255.255.255.0
Possible Values: 000.000.000.000 … 255.255.255.255
To set the Subnet Mask, use the CURSOR button to select which digit
group you wish to change, and then use either VALUE buttons to change the
value. The value will change rapidly if the key is held down.
Gateway Address IP Gateway
192.168.0.0
Possible Values: 000.000.000.000 … 255.255.255.255